Fiber proof testers are made to use a set load to Optical Fiber Ribbon Machine in order to test the strength of the spliced Fiber. Our Fiber proof testers are available in both linear and rotary designs, for both proof and stress screening. Fiber proof testers are for sale to solitary setting, multimode, and polarization-maintaining fibers. Select from devoted, standalone techniques or multi-purpose designs which are also able to stripping, cleaning, cleaving, splicing, and recoating.
Fiber Recoaters with Proof Testers offer simple, integrated methods to recoat and test combination-spliced fibers. The Fiber recoating procedure restores the barrier covering to some stripped Fiber, providing much more flexibility when compared to a heat-reduce protection sleeve, enabling it to be dealt with and coiled with no damage to the fusion-spliced area. The integrated linear or rotary Proof tester enables users to immediately check a recoated Fiber using a pre-determined weight and determine the long-term longevity of the Fiber. Because of the capability to restore a combination-spliced Fiber to near initial problem, these techniques are ideal for applications like undersea visual Fiber cables, submarine interaction wiring, Fiber lasers, or Distributed Bragg Reflector (DBR) lasers.
The procedure starts off with the combination-spliced section of Fiber being placed in the middle of the mold assembly (see image to the right). As soon as set in place, inserts within the Fiber obstructs secure the spliced Fiber in place. Recoat materials is pumped to the cavity and then Ultra violet-treated. The recoated Fiber can then be tested by pulling into it as much as a pre-decided weight.
Recoater and Mold Set up Choices – Recoaters are available with either an automatic or manual mold set up. The automatic mold set up functions pneumatic control over the mold plates and it is enhanced for top-volume manufacturing applications. Manual mold assemblies, on the other hand, use easy-to-open mold plates that provide much more flexibility and are ideal for reduced-volume manufacturing or R&D applications. An automatic or handbook volumetric dispensing water pump and shot method is employed to inject the recoat materials to the mold cavity.
The Optical Fiber Proof-Testing Machine comes regular with a mold set up for Ø430 µm coated materials; For your manual recoaters (Product #s PTR206, PTR206B, PTR307, and PTR307B), the mold assembly comes individually to ensure that customers can choose the right mold covering size for his or her application. Custom mold covering dimensions can be found up to Ø900 µm. Pre-installing of the mold assembly at the manufacturer is additionally readily available. Get in touch with Technology Assistance for more information on custom molds or manufacturer set up.
We provide each higher-index (Item # AB950200) and low-directory (Item # PC373) recoat components for use in these recoaters. Recoaters with manual injection pumping systems (Product #s PTR206B and PTR307B) are appropriate for both varieties of recoat materials; other recoaters are appropriate for the high-index materials only. Our handbook recoaters with the automatic shot program (Item #s PTR206 and PTR307) can be customized to work with both the low- and high-directory recoat material; please get in touch with Technology Assistance for additional information.
Proof Tester Choices – The PTR206, PTR206B, and PTR208 Fiber Recoaters include an incorporated linear Proof tester, which takes the Fiber up to and including predetermined weight (20 N) and after that produces it. The linear Proof tester utilizes the same Fiber keeping obstructs as the recoater and thus the Fiber will not need to be relocated prior to testing. The PTR307 and PTR307B Fiber Recoaters have a built-in rotary Proof tester, which can perform each Proof and stress tests (?89 N). One set of Proof check grips is provided; substitute Proof check grips can be purchased listed below in packages of 10. Every screening procedure is fully programmable through the included handset or tablet controller, allowing qyjflh consumer to choose guidelines including the load, the pace in which the stress is applied, and the hold time.
Inserts for Fiber Keeping Obstructs – In addition to the above, we provide you with a variety of inserts for use in the Fiber keeping obstructs of the recoaters in order to back up a broad range of Optical Fiber Proof-Testing Machine coating diameters. For recoaters using a rotary Proof tester, the inserts are appropriate for Fiber covering diameters in a range from 125 µm to 900 µm. For recoaters with a linear Proof tester, the inserts cover a range for Fiber films from Ø250 µm to Ø900 µm.